How to Configure the ALTA Ethernet Gateway 4

One way to set up the ALTA® Ethernet Gateway 4 (EGW4) is to use the local HTTP Interface or configuration page. In these four steps, you can configure the ALTA EGW4:

Connect the gateway to a network that supports IP assignment via Dynamic Host Configuration Protocol (DHCP).
Activate the HTTP Interface or local configuration page.
Access the gateway’s local configuration page through a web browser.
Configure the gateway.
Plug the ALTA EGW4 into an Ethernet port, and it will automatically connect to iMonnit. This Monnit Knowledgebase article outlines the above steps in greater detail so you’ll know exactly how to access and configure the ALTA EGW4 via the HTTP Interface.

Review the how-to article 

Products:

https://www.matt.nz/Products/Food-Dairy/Data-Acquisition-Logging/