Chemical
An optimal and safe process requires immediate information by robust and fast process analyzers. The chemical industry sets high demands on housing, electronics and sensor technology. Difficult profitability, quality control, and regulatory factors in the chemical industry make monitoring more important than ever. Mätt Solutions with SensoTech have solutions that monitor and control liquids in lines, reactors, filters, scrubbers, heat exchangers, waste lines, basins and almost anywhere liquids flow. Where accuracy is critical, or where high pressure, high temperatures or sensitive processing environments make sampling impractical or impossible, SensoTech analyzers are ideal for monitoring inline processes. LiquiSonic® sensors are engineered for tough industrial processes, including Class I Division 1 Hazardous Area installations.
A rugged housing is crucial for protection and high mechanical stability. Depending on the sensor type, SensoTech housings can withstand temperatures up to 200 °C or 392 °F, rated pressures up to 500 bar or 7,250 psi, and are resistant to lyes, acids and solvents. The fundamentals for this are the high-grade materials used such as stainless steel, PTFE and PFA, alloy steels or tantalum. The sensor design consists of one homogenous body and requires no gaskets.
LiquiSonic® Sensors are equipped with all common process adapters and fittings. By changing immersion lengths or the process adapters, SensoTech sensors fit into tanks and vessels of almost every design, as well as directly in every size tube. Measuring directly in the vessel without additional process connection is possible. The innovative and cost-efficient combination of sensor and valve is an ideal solution for process analytical applications in the pharmaceutical and fine chemical industry.
LiquiSonic® systems can easily be adapted to various modified process conditions. The Controller software manages up to 256 various product characteristics which can be activated after the sensor replacement or when process conditions change.
Mätt Solutions can offer all current and emerging standards of signal processing. For continuous concentration and density measurement for example, 4-20 mA in 2-wire loop power, or 4-wire technology, Profibus PA or Foundation Fieldbus, Modbus and Ethernet are available. A non-contact output or a digital output can be configured for alarm level detection and switching.
- Gas scrubber monitoringB
- Brine purification in chlorine-alkali electrolysis with the LiquiSonic® measuring system
- Brine purification Chlorine-alkali-electrolysis
- AdBlue® production
- Caprolactam Processing
- Phosgene Gas Scrubbing
- Urea production
- Chlorine drying
- MDEA-scrubbing
- Sodium silicate
- Benfield Process Scrubber
- WSA Process
- Formaldehyde Synthesis
- Water Cut Analyzer
- Titanium Dioxide post-treatment
- Emergency Vent Scrubber
- Solvent recovery (distillation)